DIY iPhone 11 Pro Max Battery Replacement: A Complete Guide
iPhone 11 Pro Max Battery Removal is a complicated task that should be handled by experts. These technicians should be qualified, experienced and have the right tools for the repair. They must also be able to offer solid support and a warranty.
Before starting, it’s crucial to heat the phone to melt the adhesive. Make use of plastic tools while working on the battery to stop it from becoming bent.
What can I replace?
Apple iPhone batteries are susceptible to degradation over time, and eventually lose their ability to charge. When this occurs, the battery can be repaired to restore function. This process is easy and can be completed at home if you have the proper tools. Even if you complete the repair yourself, you’ll save money. It is suggested to test the battery prior to installing it. This will confirm that all functions work, including Face ID Wi-Fi, Face ID, LTE, and the speaker and microphone.
First, turn off your iPhone. Take off the two screws at the base of the screen. Make use of a suction tool to lift the display a bit and slide an opening pick around the edges. Be careful not to damage the cables that connect the display to main board.
After you have removed the screw, you can disconnect the Lightning flex cable connectors from the logic board. Now you can remove the bracket plate on top of the Lightning connector cable set by dislodging the two 1.3 mm screws with a Y000 driver.
Three pieces of stretch-release strips secure the battery in the case. Heat or alcohol can be employed to make the adhesive strip weaker. Be careful not to damage the battery or break it using your tool. Once the adhesive is released it is possible to gently pull the battery away without bend it.
Safely remove
A few years into its time, the battery in a smartphone will begin to decline. It could cause the phone to slow down and even shut down. It is easy to fix the performance of a smartphone by opening the device, taking out the old battery and replacing it with a fresh one. Numerous repair manuals and tools are accessible for the job. The process can be time-consuming, and if not done properly, it may be dangerous. It also voids any warranty that is still on the device, and could affect the water-resistant capabilities of the device.
Replace the battery if you notice that your iPhone 11 Pro Max does not function like it used to. It’s a simple process but it is best to perform the work on a steady and clean surface using an efficient tool. Utilize plastic tools, not metal – metal could damage the battery and result in internal damage. It is also important to heat the tool prior to working on the battery – this softens the adhesive which holds it in the place.
Connect the battery cable to your computer and switch off your iPhone. Using a suction cup, open the display like the cover of a book, but be careful not to cut the display completely. Then, slide an opening pick around the perimeter of the screen to create a barrier that separates it from the body of the phone and look here for important points https://dienthoainhanh.com/thay-pin-iphone-11-pro-max/. Be careful not to damage the ribbon cables connecting the display to logic board.
You can also do it yourself.
If you’d like to upgrade the battery on your iPhone 11 Pro Max battery without having to pay Apple the cost, you can do it at home. Some tools are needed and patience. Remove the two pentalobe screw on the top of the screen. Then utilize a suction tool to raise the screen a bit. Set the screen on something solid to keep it in place. Slide a plastic opening pick around the edges of the case to separate the screen from the case. Be careful not to damage the cables that connect the screen to the logic board.
After the screen has been removed, you can open the phone by prying it up as a book cover. Continue separating the components until the adhesive strips appear on the battery’s back. If one of the strips tears, you can try to lever it up with a flat, stable tool, such as a plastic opening pick or the pliable iOpener. Repeat this procedure when the strip is ripped again.
The lithium-ion batteries deteriorate over time, however you can extend their lifespan by performing regular maintenance. To do so remove and then recharge the battery completely. You will get maximum battery life out of your iPhone. You can also buy an entirely new battery. But, you should use Swappa’s repair network to locate a skilled technician who can do the task correctly.
Professional
Over time the capacity of battery on your iPhone 11 Pro Max will diminish. You will see that your device is running more quickly and will shut off unexpectedly. The performance and life span of your phone will be restored with an upgrade battery. Removing the iPhone 11 Pro Max battery is an easy task that you can do at home with a few simple tools.
Taking your phone to an Apple Store or authorized service provider is another way of having your battery replaced. The cost of this service is high and may void the warranty. It could also take a bit of time to repair or update your iPhone.
You can replace the iPhone 11 Pro Max’s battery by yourself using a repair manual or a kit purchased from iFixit. These kits come with an alternative battery from a third party as well as a tool set. They will not end your iPhone’s warranty in the event that you attempt to replace the battery.
It’s time to replace the battery on your iPhone 11 Pro Max if it’s slowing down or has an insufficient battery level in Settings. Our in-store and mail-in options are quick and offer a 12 months of warranty on all parts and labor. Genuine OEM batteries are used to ensure optimal performance and longevity of the battery. Explore our Certified Second Go range to save more money.